386-428-3672
Feather-Weight Adjustable Safety Blocks
5 Ton Maximum Capacity

The Featherweight series adjustable safety block is designed to provide maximum protection for most press brakes and smaller presses where working space is at a premium during set up and maintenance.

These Featherweight blocks provide convenient use and handling for your employees. The wide span of adjusting screw and nut assemblies have precision-cut Acme threads for extra strength and ease of use with a maximum static load of 5 tons. The 6061-T6511 high-strength aluminum body is machined to give you ultimate stiffness with maximum adjustability at a minimum weight. In fact, these blocks only weigh TWO pounds for the 12 inch model. The adjusting screw is easily moved by hand.
When you make it easy for your employees, they will use it! Safety practices quickly become a habit with the Sat-T-Block Featherweight Press Blocks.
Light-Weight Adjustable Safety Blocks
35 Ton Maximum Capacity

This LIGHT-WEIGHT series is designed to provide maximum protection for most press brakes and smaller presses where working space is at a premium during set up and maintenance.
These LIGHT-WEIGHT blocks provide convenient use and handling for your employees. The wide span of adjusting screw and nut assemblies have precision-cut Acme threads for extra strength and ease of use with a maximum static load of 35 tons. The 6061-t651 high-strength aluminum body is machined to give you ultimate stiffness with maximum adjustability. These blocks are one-third (1/3) of the weight of standard safety blocks available from others. The adjusting screw and nut assembly is easily moved by hand.

The LIGHT-WEIGHT Saf-T-Blocks come standard with a base plate. Base plates allow for stability where room permits.
Mid-Weight Adjustable Safety Blocks

The Mid-Weight Adjustable series has been successfully tested by an outside third party laboratory. This series is specifically engineered to be used between our Light-Weight adjustable press block LSB-1B & 2B - rated at 35 tons, and our Standard SB-1 adjustable rated at 125 tons.

The Mid-Weight series is available from 10" to 60" by the inch and has the option of having  5" up to 12" of screw adjustment. This design maintains a static load of up to 75 tons and this Mid-Weight block is easily stored in our optional holder that is ready to mount to your press. These blocks are also available with our electrical power cut-off system, adding safety to your press and for your employees. The size and weight makes it very easy for them to move the block assembly into and out of the press area.

The MID-WEIGHT Saf-T-Blocks come standard with a base plate. Base plates allow for stability where room permits.

These Mid-Weight models can normally be shipped within 48 hours A.R.O.
Heavy-Weight Adjustable "SB Series"
Capacity: 125 ton static load in 1 inch increments. Standard screw adjustability is 5 inches, however, screw adjustment up to 12 inches is available. See Standard Safety Block SB-1 for configuration and dimensions.

The adjusting screw and nut assembly provides easy adjustment normally  both up and down by hand. These screw devices are used instead of wedges on the SB-1 adjustable safety press blocks, allowing for greater span of flexibility. The adjusting screw and nut assembly is mounted securely on top of the safety block at the factory. This assembly is used in conjunction with a bottom end cap for additional stability and safety. The assembly allows up to 5 full inches of screw adjustment.

Heavy-Weight adjustable safety blocks are available with handles, holders, and power cut-offs. View options page for details.
5 ton maximum static load capacity | Available in three sizes  | Steel Holder and Electrical Cut-Off System also available
   35 ton maximum static load capacity | Safety Block length in 1" increments ~ up to 60" | 5" to 12" screw adjustment available
75 ton maximum static load capacity | Safety Block length in 1" increments ~ up to 60" | 5" to 12" screw adjustment available
125 ton maximum static load capacity | Safety Block length in 1" increments |Standard screw adjustment is 5"
Saft-T-Block meets OSHA Requirements
Canadian and U.S. Applicable Standards for Presses CSA (Power Press)
7. Machinery Requirements  OSHA (Power Press)   Standards-29 CFR Part 1910
Feather-Weight  Max Adjustable Safety Blocks
10 Ton Maximum Capacity

Our latest development to the Adjustabe line is the 10 TON  Adjustable

Featherweight Max, If you are interested in this block please contact us for further information,
Building Safety Blocks Since 1995
Saf-T-Block, LLC
P.O. Box 1149
New Smyrna Beach, FL 32170

Phone: 386.428.3672

Sales@saf-t-block.com